SCAG SJ1125-N-34-25YMT Jackal Stand-On Mini Skid Steer

SKU: SJ1125-N-34-25YMTCategories: Industrial

Not yet rated(0)

Stand-on mini skid steer with 1,125 lb lift capacity, 83-inch hinge pin height, and up to 15 GPM of auxiliary hydraulics at 3,000 psi. Dual 6-gallon fuel tanks and Grade 100 military-steel bucket standard. Available with Kubota, Kohler, or Yanmar diesel around 24-25 HP.

$39,999.00

To maintain brand standards, this product is only available for purchase in-store.

Please call 972-235-2086 for details or to arrange in-store pickup.

Scag SJ1125-N-34-25YMT Description

Landscape contractors and excavation crews working tight-access job sites run into the same problem: a full-size skid steer doesn’t fit, and hand tools are too slow. The SCAG Jackal is built for that gap. It lifts 1,125 lbs, tips at 3,142 lbs, and reaches 83 inches at the hinge pin, comfortably clearing truck beds, dumpsters, and shipping containers at a fraction of the footprint of a conventional machine.

Two 18cc variable displacement hydro pumps and two Parker Torqmotor cast-iron wheel motors drive independent track control. Standard 7-inch tracks apply just 5.5 psi on turf and finished surfaces. Optional 9-inch wide tracks are available when terrain demands more ground contact. Ground speeds reach 4 mph forward.

Auxiliary hydraulics run at up to 15 GPM and 3,000 psi, driving grapple buckets, pallet forks, power box rakes, and other attachments. Standard bucket is 34-inch or 40-inch Grade 100 military-grade steel. Dual 6-gallon fuel tanks with wide filler necks and in-tank gauges support all-day operation. A cushioned stand-on platform, joystick controls, and removable service panels round out the machine.

Scag SJ1125-N-34-25YMT Features

1,125 lb Lift Capacity
Lifts 1,125 lbs, tips at 3,142 lbs, and reaches 83 inches at the hinge pin. Clears truck beds, dumpsters, and containers that a shorter machine can’t reach.
Dual-Track Drive System
Drives independent left and right tracks via joystick using two Parker Torqmotor cast-iron wheel motors. Handles all terrain types with solid traction.
Low Ground Pressure Tracks
Applies just 5.5 psi through standard 7-inch tracks on turf and finished surfaces. Optional 9-inch wide tracks are available when more ground contact is needed.
Up to 15 GPM Auxiliary Hydraulics
Operates at up to 15 GPM and 3,000 psi, powering grapple buckets, pallet forks, power box rakes, and specialty attachments.
Grade 100 Military-Grade Steel Bucket
Comes standard with a 34-inch or 40-inch bucket in Grade 100 military-grade steel. Built for wear resistance on abrasive, high-cycle commercial sites.
12-Gallon Dual Fuel Tanks
Carries two 6-gallon tanks with wide filler necks and in-tank gauges. Runs all day without fuel stops breaking up the work schedule.
Ultra-Low Center of Gravity
Fits through gates and around obstacles conventional skid steers can’t navigate. Short length and low CG maintain stability in tight-access conditions.
Diesel Engine Options
Available with Kubota, Kohler, or Yanmar diesel engines rated around 24-25 HP for reliable, fuel-efficient commercial power.

Scag SJ1125-N-34-25YMT Specifications


Lift Capacity	1,125 lbs.
Tip Capacity	3,142 lbs.
Hinge Pin Height	83 in.
Auxiliary Hydraulic Flow	Up to 15 GPM
Auxiliary Hydraulic Pressure	Up to 3,000 psi
Drive System	Hydrostatic, dual variable displacement pumps
Track Width (Standard)	7 in. (9 in. optional)
Ground Pressure	5.5 psi
Forward Speed	Up to 4.0 mph
Fuel Capacity	12 gallons (dual 6-gal tanks)
Length (no attachment)	86 in.
Width (no attachment)	35.5 in.
Height	56.5 in.
Weight (no fuel, no attachment)	2,952 lbs.
Engine Options	Kubota D1305-E4B / Kohler KSD1403 / Yanmar 3TNV80FT (~24-25 HP diesel)
Consumer Warranty
Commercial Warranty	2 years (verify with dealer)