eXmark Radius X-Series 60″ Zero Turn Mower RAX730GKA604A3 Overview
Exmark Radius X-Series zero-turn mowers deliver the cut quality and durability professionals demand with a host of new features and innovations. Powered by Kawasaki FX engines, with Hydro-Gear integrated transmissions and up to 10 mph fwd. ground speed, Radius X-Series improves productivity, but a full-suspension operator seat with operator preference dial and elastometric vibration control (EVC) means maximum comfort. Available with 48-, 52- and 60-inch UltraCut mower decks.
eXmark Radius X-Series 60″ Zero Turn Mower RAX730GKA604A3 Features
UltraCut Deck Technology
Exmark’s exclusive UltraCut decks are featured on Radius models in a choice of 44- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
Heavy Duty Unibody Frame
Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
Quick Adjustable Rollover Protection System (ROPS)
Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
Fuel Gauge Window
Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.
Height of Cut Made Easy
The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
Comfort Stepped Up
X-Series machines step up to Exmark’s full-suspension seating system, with three inches of adjustable vertical suspension combined with patented EVC stretch fabric to provide maximum operator isolation from bumps and vibration.
Service Made Easy
A tools-free removable foot rest eases access to the top-side of the cutting deck, and tool-less removable belt shields provide easier access to belts and spindles. A welded jack receiver on the Radius frame allows for easier service to the bottom-side of the deck when combined with the optional jack.
eXmark Radius X-Series 60″ Zero Turn Mower RAX730GKA604A3 Specifications
- Blade SpindlesNo maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm(.98″)diameter spindle shaft and splined blade driver.
- Drive Tires24 x 10.5-12 K500
- Tractor FrameUnibody, welded, heavy-duty 2″ X 3″ rectangular tubular steel.
- Steering ControlHydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
- Front Caster Tires13 x 6.5-6, smooth tread, pneumatic. Sealed Taper Roller Bearings
- Parking BrakeLever-actuated pawl brake.
- SeatDeluxe suspension (adjustable spring suspension) seat with high back, molded foam flip-up armrests, and integral safety switch
- Electrical12-volt battery with 15-amp alternator.
- Standard FeaturesEngine hour meter, cup holder, tow hitch and jack receiver
- UPC193308000435
- Engine BrandKawasaki
- Engine ModelFX730V
- Engine Displacement726
- Engine SeriesV-Twin
- Fuel SystemCarbureted
- Engine Speed3,700 rpm
- Air FilterCyclonic Air Cleaner
- Fuel TypeGas Carbureted
- Fuel Capacity7-gallon (26.5-L) single fuel tank with single fill location.
- Fuel IndicatorTranslucent Visual
- DriveHydro-Drive
- Drive DescriptionDual Hydro Gear ZT3400, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters.
- Engine HP*23.5*
- SpeedInfinitely variable speed selection from 0-10.0 mph (16.1 kmph) forward, 0-6.0 mph (9.7kmph) reverse.
- Carb CompliantNo
- Deck LiftStandard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
- Safety PackageOperator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- ROPS2-post foldable ROPS standard with seat belt and latch.
- PTO EngagementMagStop electromagnetic 125-ft-lb clutch
- Drive Wheel ReleaseAllows unit movement without engine running.
- Casters.375″ thick caster yoke arms
- Engine Spec_S26
- Width / Cutting Deck60″
- Deck StyleFloating Deck
- Deck Style DescriptionFull-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
- Deck Construction10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt.
- Blade Tip SpeedApproximately 18,500 fpm.
- Cutting Heights1.5″ (3.8 cm) to 5.0″ (12.7 cm) in 0.25″ (.6 cm) increments, adjustable from operator’s seat.
- Blades3 Blades at 20.50″ Length
- Width72.7 in (184.7 cm)
- Length82.2 in (208.8 cm)
- Height70.4 inches (178.8 cm)
- Curb Weight1006
4 years or 500-hour warranty, commercial or residential.
