eXmark Radius E-Series 44″ Zero Turn Mower RAE708GEM44300 Overview
Exmark Radius E-Series commercial-grade zero-turn riders provide the best of both worlds: The features lawn professionals need, like Series 3 (5″ deep) UltraCut decks and maintenance-free spindle assemblies, while delivering value that makes this mower attractive to anyone with a lot of grass to mow. Cutting deck widths available: 44-, 48-, 52- and 60 inches.
eXmark Radius E-Series 44″ Zero Turn Mower RAE708GEM44300 Features
Large Caster Tires
Radius models are equipped with large front caster tires. 13 x 6.5 pneumatic tires come standard on 48″, 52″, and 60″ models and 13 x 5.0-6 on the 44″ model.
UltraCut Deck Technology
Exmark’s exclusive UltraCut decks are featured on Radius models in a choice of 44- to 60-inch cut widths. Every UltraCut cutting deck features Exmark’s exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.
Heavy Duty Unibody Frame
Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.
Quick Adjustable Rollover Protection System (ROPS)
Uses an easy-to-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.
Fuel Gauge Window
Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.
Height of Cut Made Easy
The patented height of cut system is a user friendly tool developed for operators to quickly and accurately select the height of cut.
eXmark Radius E-Series 44″ Zero Turn Mower RAE708GEM44300 Specifications
- Blade SpindlesNo maintenance, sealed and non-greasable spindles; 7.30″-diameter cutter housing contains 17mm (.67″) diameter spindle shaft and hex blade drive.
- Drive Tires22 x 8.5-12 K500
- Tractor FrameUnibody, welded, heavy-duty 2″ X 3″ rectangular tubular steel.
- Steering ControlHydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment.
- Front Caster Tires13 x 5.0-6, smooth tread, pneumatic. Bushings
- Parking BrakeLever-actuated pawl brake.
- SeatHigh back seat with foam padded seat cushion, armrests and integral safety switch
- Electrical12-volt battery with 15-amp alternator.
- Standard FeaturesEngine hour meter, cup holder, tow hitch and jack receiver
- UPC193308212302
- Engine BrandExmark
- Engine ModelLC2P77F
- Engine Displacement708
- Engine SeriesV-Twin
- Fuel SystemCarbureted
- Engine Speed3,600 rpm
- Air FilterStandard Engine Manufacturer’s air filter
- Fuel TypeGas Carbureted
- Fuel Capacity7-gallon (26.5-L) single fuel tank with single fill location.
- Fuel IndicatorTranslucent Visual
- DriveHydro-Drive
- Drive DescriptionDual Hydro Gear ZT2800, hydrostatic transmission with relief valves and independent, replaceable filters.
- Engine HP*24.5*
- SpeedInfinitely variable speed selection from 0-7.0 mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) reverse.
- Carb CompliantNo
- Deck LiftStandard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
- Safety PackageOperator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- ROPS2-post foldable ROPS standard with seat belt and latch.
- PTO EngagementElectromagnetic 125-ft-lb clutch (Ogura)
- Drive Wheel ReleaseAllows unit movement without engine running.
- Casters.375″ thick caster yoke arms
- Engine SpecK5045
- Width45.4 in (115.3)
- Length81.7 in (207.5 cm)
- Height69.7 inches (177.0 cm)
- Curb Weight802
4 years or 500-hour warranty, commercial or residential.
