eXmark Hydro Turf Tracer X-Series 60″ Walk Behind Mower TTX650EKC604N0
By virtually any measure, the Turf Tracer X-Series represents the definitive, full-featured hydro mower. Whether you choose the 52- or 60-inch cutting deck, the UltraCut Series 4 with splined spindle blade driver is up to the toughest jobs. As are the X-Series engines—Kohler® EFI, Kawasaki® and Kohler EFI Propane. Ground speeds up to 6.75 mph, and up to 2.25 in reverse, also rank the Turf Tracer X-Series among the most productive mowers in its class.
eXmark Hydro Turf Tracer X-Series Walk-Behind Mower TTX650EKC604N0
Patented Enhanced Control System (ECS)
Recent university tests showed landscape professionals prefer our control system to all others on the market.
Propane
An eco-friendly, lower cost fuel reduces operating expenses versus typical gas-powered mowers.
Floating Deck
Full-floating UltraCut deck. Side discharge standard, with molded discharge chute and option to bag or mulch.
Superior Air Filtration
This series comes standard with heavy-duty canister air filtration systems for longer engine life, more efficient performance and simple maintenance.
Clutch Performance
A large-capacity, electromagnetic PTO clutch provides excellent durability for extra-long life.
Superior Cut Quality
UltraCut Series 4 deck
Deck Options
With the Turf Tracer X-Series, you can choose up to a 60-inch deck.
eXmark Hydro Turf Tracer X-Series 60″ Walk-Behind Mower TTX650EKC604N0
- Steering ControlHydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn.
- Casters.38″ thick caster yoke arms
- Front Caster Tires11 x 4.0-5, smooth tread, semi-pneumatic.
- Drive Tires18 x 8.5-8, 4-ply Turf Master®
- Safety PackageOperator Presence Controls (OPC). Operator must have speed control lever in neutral and blades disengaged to leave operator’s position without stopping engine
- Parking BrakeLever-actuated mechanical compression.
- Electrical12-volt battery with 20-amp alternator.
- Standard FeaturesEnhanced engine hour meter
- UPC193308000152
- Engine ModelECV650
- Engine BrandKohler
- Engine SeriesCommand EFI
- Engine Speed3,600 rpm
- Air FilterHeavy-duty canister air filtration system
- Drive DescriptionTwin Hydro-Gear variable-displacement pumps and twin high-efficiency Parker/Ross wheel-drive motors with 1″ (2.54cm) tapered shafts.
- SpeedInfinitely variable speed selection from 0- 6.75 mph (10.9 kmph) forward, 0-2.25 mph (3.6 kmph) reverse.
- PTO EngagementElectromagnetic 200 ft-lbs clutch.
- Fuel Capacity5-gallon (18.9-L) fuel tank.
- Drive Wheel ReleaseAllows unit movement without engine running.
- Deck LiftManual lift with hairpin from hole to hole for position adjustment.
- Fuel SystemElectronic Fuel Injected
- Engine Displacement694
- Engine HP*21*
- DriveHydro-Drive
- Fuel IndicatorNone
- Carb CompliantNo
- Fuel TypeGas EFI
- Engine Spec3017
- Deck StyleFloating Deck
- Deck Style DescriptionFull-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
- Width / Cutting Deck60″
- Deck Construction10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 10-gauge formed and welded spindle mounting locations for improved strength.
- Cutting Heights1.5″ (3.8 cm) to 4.5″ (11.4 cm) in 0.5″ (1.3 cm) increments.
- Blade SpindlesNo maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (.98″) diameter spindle shaft and splined blade driver.
- Blade Tip SpeedApproximately 18,500 fpm.
- Blades3 Blades at 20.5″ Length
- Width73.0 in. (185.4 cm)
- Length104.8 in. (266.2 cm)
- Height45.0 in. (114.3 cm)
- Curb Weight840
