eXmark 96″ Lazer Z E-Series Zero Turn Mower LZX980EKC96RW0 Overview
With our top-rated Lazer Z X-Series, there are plenty of boxes to check. For starters, it’s now available as a 96-inch gas powered zero-turn mower. You can choose from five rugged, commercial-grade engines, including high efficiency Electronic Fuel Injection (EFI) options. Which also features our exclusive EGov and RED technology which can boosts fuel efficiency up to 41%. The X-Series also features our UltraCut Series 6 deck in 52-, 60-, 72-, and 96-inch cutting widths. Whatever combination you choose, operators will ride in unrivaled comfort thanks to our unique seating system. There’s even a standard 12-volt adapter to keep devices charged. So, if you’re looking for our top-of-the-line mower, the Lazer Z X-Series should be at the top of your list.
eXmark 72″ Lazer Z E-Series Zero TurnMower LZX980EKC96RW0 Features
Patented RED Technology
Enabling communication and response between key systems on your mower with defined operation modes, system monitoring and clutch saver features.
UltraCut Series 6 Deck
This full-floating deck uses double-row bearings with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.
A New Level of Comfort
Comfort increases productivity. That’s why we designed a new, ergonomically advanced seat system featuring our exclusive Iso-Mount Seat Isolation System.
Productivity
Higher ground speeds with 16cc drive system and more power with larger engine displacements for improved productivity.
Rear Discharge Deck
Available in 60 and 72 inch cutting widths, the rear discharge deck offers increased clipping discharge control, reduced noise, and the ability to trim on both sides of the cutting deck while keeping the operator clean.
Tool-less Belt Removal
Deck and hydro belt can be installed without using any tools.
eXmark 96″ Lazer Z E-Series Zero Turn Mower LZX980EKC96RW0 Specifications
- Blade SpindlesNo maintenance, sealed and non-greasable spindles; 7.75″-diameter cutter housing with 25mm (1.18″) diameter spindle shaft, double row bearings, top and bottom, and splined blade driver.
- Drive Tires24 x 12.0-12, 4-ply Turf Master®
- Tractor FrameUnibody, welded, heavy-duty 1.5″ x 3″ tubular steel.
- Steering ControlHydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
- Front Caster Tires13 x 6.5-6, smooth-tread, semi-pneumatic.
- Parking BrakeLever-actuated disc brake.
- SeatDeluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
- Electrical12-volt battery with 40-amp alternator.
- Onboard IntelligenceRED Technology
- Standard Featuresengine hour meter and cup holder
- UPC193308119649
- Engine BrandKohler
- Engine ModelECV980
- Engine Displacement999
- Engine SeriesCommand Pro EFI
- Fuel SystemElectronic Throttle Body
- Engine Speed3,650 RPM
- Air FilterHeavy-duty canister air filtration system
- Fuel TypeGas EFI
- Fuel Capacity12-gallon (45.4-L), single fuel tank with single fill location.
- Fuel IndicatorYes – electronic Sender
- DriveHydro-Drive
- Drive DescriptionTwo Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 18 cubic inch motors.
- Engine HP*38*
- SpeedInfinitely variable speed selection from 0-10.5 mph (16.8 kmph) forward, 0-6.0 mph (9.7 kmph) reverse
- Carb CompliantNo
- Deck LiftElectric over hydraulic push button control
- Safety PackageOperator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
- ROPS2-post foldable ROPS standard with seat belt and latch.
- PTO EngagementMagStop Electromagnetic 250-ft-lb clutch with spot brake
- Drive Wheel ReleaseAllows unit movement without engine running.
- Casters.50″ thick caster yoke arms.
- Engine Spec3018
- Width / Cutting Deck96″
- Deck StyleFloating Deck
- Deck Style DescriptionFull-floating UltraCut Rear Discharge Deck. Finish cut baffles installed standard, rear discharge improvement baffles available via kit.
- Deck Construction7-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge high strength alloy side skirt.
- Blade Tip SpeedApproximately 18,500 fpm
- Cutting Heights1.0″ (2.5 cm) to 5.5″ (11.8 cm) in 0.25″ (0.64 cm) increments.
- Blades4 Blades at 24.50″ Length
- Width101.3 in. (257.0 cm), 72.5 in. @ 3 in. HOC when folded
- Length95.8 in. (243.3 cm)
- Height70.5 in. (179.1 cm)
- Curb Weight2200
